Virtual TapeServer SCSI-to-FC Adapter User Manual

6-11
Chapter 6: Using Visual Manager
Main Menu → System → Active Fabric
This menu allows setup of Active Fabric
®
options.
Figure 6-9. Active Fabric screen
To make any changes, modify the entries as described below and then select the Submit button.
• Number of Controller LUNs sets the number of controller LUNs reported by the VT5900-
SA. The number must be in the range of 0 to 4.
• Controller LUNs in Auto Assigned map go is a setting used to change the location of LUNs
in an auto-assigned map. LUNs can be positioned starting at the beginning (first location) or at
the end (last location) of the map.
• Unit Attention Override Mode toggles between Enabled and Disabled. The default setting is
Disabled. When set to Enabled, this option allows backup/restore operations to continue to
completion without interruptions from Unit Attention conditions.
For information on controller LUNs or Extended Copy commands, see Appendix B from this
manual.