Virtual TapeServer SCSI-to-FC Adapter User Manual

6-26
Chapter 6: Using Visual Manager
Figure 6-23. Select Map for FC Port
The current map information is shown at the top of the dialog box. This information can be
changed as described below.
• To completely clear the current map of all entries, select the Clear Map button.
• To fill the map, select the fill option from the pull-down list and then select the Fill Map
button. When the map is filled, the menu shows the current mappings.
• To delete all gaps, or unfilled entries, from this map, select the Remove Gaps button. When
removing gaps from the table, this option also renumbers all LUNs in sequential order starting
with LUN 0.
• To delete a specific map entry, select a LUN from the pull-down list under Delete Map Item.
To delete multiple LUNs, also select the end of the range from the optional pull-down list.
Either way, select the Delete Entry button to remove the item(s) from the map.
• To create a specific map item, the LUN, Protocol, Port, and Device can be selected from the
pull-down lists for either Discovered Device Entry or Manual Device Entry. Discovered
Device Entry is limited to devices already discovered. Manual Device Entry allows you to
Note: Some operating systems require gaps be removed in the mapping table in order to
detect all devices.