Virtual TapeServer SCSI-to-FC Adapter User Manual

6-27
Chapter 6: Using Visual Manager
manually set up a device type at a specific Target and LUN. To make the changes permanent,
select the Create Entry button.
Main Menu → Statistics
This menu shows port statistics. Statistics will be shown according to the selection made.
Figure 6-24. Statistics page
Select the Go button to clear all current statistics and continue logging any new statistics.
Note: Maps named ‘Auto Assigned’ or ‘SCC’ may not be modified, cleared, filled, or have
entries removed.
Note: Map settings are saved to memory when any of the buttons within the page are selected but
are not activated until either the Activate Mapping Changes button is selected or the VT5900-
SA is rebooted.