Virtual TapeServer SCSI-to-FC Adapter User Manual

6-29
Chapter 6: Using Visual Manager
Main Menu → Utilities → FTP Utility
This menu provides access to an FTP Utility.
Figure 6-26. FTP Utility screen
The FTP Utility requires the use of a JAVA applet and will prompt for permission to install the
applet, if needed. If you receive this prompt, follow the onscreen instructions to complete
installation of the applet. The FTP Utility then prompts for permission to run the applet.
To proceed, select the Grant this session button so the FTP Utility becomes available for use.
To use the FTP Utility, do the following:
1. Fill in the User Name, Password, and IP Address of the VT5900-SA.
2. Select the Connect button to establish an FTP session with the VT5900-SA.
3. Select a local file to upload or download. The following file types are supported.
For uploads, or files sent to the VT5900-SA, you can select from .cfg (configuration files) and
.dlx (firmware files) formats.
Note: Internet access is required to verify the signature for the FTP applet and to download the
JAVA applet plug-in for your browser.