Virtual TapeServer SCSI-to-FC Adapter User Manual

6-30
Chapter 6: Using Visual Manager
For Downloads, or files retrieved from the VT5900-SA, you can select from .cfg (configura-
tion files) as well as from either curtrace.txt (system traces for current boot cycle) or
prvtrace.txt (system traces from previous boot cycle).
4. Select binary transfer mode for the VT5900-SA.
5. Select the Put to Rtr button to upload a file to the VT5900-SA or the Get From Rtr button to
download a file from the VT5900-SA.
If a valid firmware or configuration file is sent to the VT5900-SA, an automatic reboot will occur
once the file has been received by the VT5900-SA. The user will not be able to access the
VT5900-SA from the Visual Manager web interface during the time that the reboot is in process,
usually a period of about 30 seconds.
Main Menu → Utilities → Trace Settings
This menu allows the configuration of trace settings.
Figure 6-27. Trace Settings screen