Virtual TapeServer SCSI-to-FC Adapter User Manual

7-5
Chapter 7: Using the Serial/Telnet Interface
Baud Rate Configuration
This menu changes the baud rate used on the serial port. Select 1 through 5 for the appropriate
baud rate setting. If you are using the Autobaud feature, it may not be necessary to set a baud rate.
See
Autobaud Feature” for more information on using the Autobaud feature.
Figure 7-4. Baud rate configuration menu
Baud Rate Configuration Menu
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
1) 9600 2) 19200
3) 38400 4) 57600
5) * 115200
X) Return to previous menu
Note: The asterisk (*) symbol indicates the current setting for the baud rate.