WAN Manager SPI Programming Guide

WAN Manager Commands and Responses
WAN Manager SPI Programming Guide—540013-001
5-77
STATUS PROCESS
STATUS PROCESS
This command displays the current status and configuration information about a
ConMgr, an SNMP trap multiplexer, a TFTP server, or a WANBoot process object.
The STATUS PROCESS command has this syntax:
cpu-num
is the processor number where the ConMgr object normally executes. You can also
use wild cards such as an asterisk (*) or question mark (?) in any combination (for
example, $ZZWAN.#?, $ZZWAN.#*, and so on).
proc-name
is the name of process other than ConMgr. You can also use wild cards such as an
asterisk (*) or question mark (?), in any combination (for example, $ZZWAN.#?,
$ZZWAN.#*, and so on).
TRACE
displays whether the ConMgr process is currently being traced.
SCF Example
STATUS PROCESS $ZZWAN.#1, TRACE
Tokens in Response Buffer
ZSPI-TKN-DATALIST:*
ZCOM-TKN-OBJSTATE: ZCOM-VAL-SUMSTATE-STOPPED
ZWAN-TKN-MEDIA-ADDR
FAMILY 1
ADDRESS 8 0 142 3 18 168 0 0 0 0 0 0 0 0
ZCOM-TKN-OBJSTATE: ZCOM-VAL-SUMSTATE-STOPPED
ZCOM-TKN-OBJNAME: "$ZZWAN.#S15.1.A"
ZCOM-TKN-OBJTYPE: ZCOM-OBJ-PATH
ZSPI-TKN-RETCODE: ZCOM-ERR-OK
ZSPI-TKN-ENDLIST:-
STATUS PROCESS $ZZWAN.#{ cpu-num | proc-name }
[, TRACE ]
Tokens in Command Buffer
ZSPI-TKN-COMMAND: ZCOM-CMD-STATUS
ZSPI-TKN-OBJECT-TYPE: ZCOM-OBJ-PROC
ZCOM-TKN-OBJNAME: $ZZWAN.#{ cpu-num | proc-name }