WAN Manager SPI Programming Guide

WAN Manager Commands and Responses
WAN Manager SPI Programming Guide—540013-001
5-13
ADD ADAPTER
alt-gateway-address
indicates the alternate SWAN-side router IP address for Path B. A gateway IP
address of 0 (0.0.0.0) indicates that the SWAN concentrator is on the same
network as the host.
alt-ip-address
indicates the IP address assigned to a SUBNET on the alternate TCP/IP process
(specified in the ALTTCPIP attribute).
alt-subnet-mask-pattern
indicates the subnet mask of the SUBNET on the alternate TCP/IP process
(specified in the ALTTCPIP attribute).
alt-tcpip-name
is the name of the alternate TCP/IP process.
gateway-address
indicates the SWAN-side router IP address for Path A. A gateway IP address of
zero (0.0.0.0) indicates that the SWAN concentrator is on the same network as the
host.
ip-address
indicates the IP address assigned to a SUBNET on the preferred TCP/IP process
(specified in the TCP/IP attribute).
swan-kernel-micode-file-name
indicates the name of the firmware object code of the microcode file you want to
run in the essential part of the FLASH memory.
swan-snmp-agent-micode-file-name
indicates the name of the object file of the SNMP agent process that you want to
run in the CLIP.
subnet-mask-pattern
indicates the subnet mask of the SUBNET on the preferred TCP/IP process
(specified in the TCP/IP attribute).
tcpip-name
is the name of the preferred TCP/IP process that supports the SWAN concentrator.
configuration-track-id
is the six-character ASCII configuration track-ID found on the concentrator label.
The track-ID is assigned when the SWAN concentrator is manufactured. It is