WAN Subsystem Configuration and Management Manual

Adding a SWAN Concentrator
WAN Subsystem Configuration and Management Manual—522463-011
4-24
Sample Configuration
These SCF commands were used in a command file to create the WAN subsystem
processes and objects shown in the sample configuration.
ALLOW ALL ERRORS
================================================================
== Configure and start the ConMgr processes
==
================================================================
ADD PROCESS $ZZWAN.#0, IOPOBJECT $SYSTEM.SYS00.CONMGR
ADD PROCESS $ZZWAN.#1, IOPOBJECT $SYSTEM.SYS00.CONMGR
START PROCESS $ZZWAN.#*
================================================================
==
== Configure the SWAN Concentrator
==
================================================================
ADD ADAPTER $ZZWAN.#S01, TRACKID "X017FF", TCPIP $ZTC0, &
HOSTIP 192.231.036.99, ALTCPIP $ZTC1, ALTHOSTIP 192.168.002.99,
&
SNMPCODE $SYSTEM.CSS00.C7849P00
ADD SERVER $ZZWAN.S01.1
ADD SERVER $ZZWAN.S01.2
ADD SERVER $ZZWAN.S01.3
ADD PATH $ZZWAN.S01.1.A, IPADDRESS 192.231.036.101
ADD PATH $ZZWAN.S01.1.B, IPADDRESS 192.168.002.101
ADD PATH $ZZWAN.S01.2.A, IPADDRESS 192.231.036.102
ADD PATH $ZZWAN.S01.2.B, IPADDRESS 192.168.002.102
ADD PATH $ZZWAN.S01.3.A, IPADDRESS 192.231.036.103
ADD PATH $ZZWAN.S01.3.B, IPADDRESS 192.168.002.103
START ADAPTER $ZZWAN.#*, SUB ALL
================================================================
The SNMPCODE attribute is optional for both SWAN and SWAN 2 concentrators
because the SNMP module is linked with the SWAN NonStop Kernel (in G06.07
and later RVUs) and does not have to be downloaded.