WAN Subsystem Configuration and Management Manual

WAN Subsystem Configuration and Management Manual—522463-011
5-1
5 Managing the WAN Subsystem
This section describes the WAN subsystem Subsystem Control Facility (SCF)
commands used to monitor, reconfigure, and control the WAN subsystem. For more
information on SCF syntax, see Section 6, SCF Commands.
•
Monitoring the WAN Subsystem
•
Reconfiguring the WAN Subsystem on page 5-4
•
Controlling the WAN Subsystem on page 5-7
Monitoring the WAN Subsystem
WAN subsystem monitoring tasks include:
•
Displaying Information About WAN Subsystem Processes and Objects
•
Displaying Information About the WAN Manager Process
•
Displaying Event Messages
Displaying Information About WAN Subsystem Processes and
Objects
Note. Throughout this manual when a distinction between a SWAN concentrator (T3880) and
a SWAN 2 concentrator (T3881) is not required, SWAN concentrator is used as a collective
term.
Table 5-1. WAN Subsystem SCF Commands for Displaying
Information (page 1 of 3)
SCF Command SCF Object Type Description
INFO ADAPTER Displays the static-configuration attribute
values for a SWAN concentrator.
DEVICE Displays the static-configuration attribute
values for a data communications subsystem
object.
PATH Displays the static-configuration attribute
values for a PATH on a CLIP within a SWAN
concentrator.
PROCESS Displays the static-configuration attribute
values for a ConMgr, an SNMP trap
multiplexer, a TFTP server, or a WANBoot
process.