WAN Subsystem Configuration and Management Manual

Managing the WAN Subsystem
WAN Subsystem Configuration and Management Manual—522463-011
5-7
Altering the WAN Manager Process
Altering the WAN Manager Process
The WAN manager process is defined by the NonStop Kernel subsystem as a
PROCESS object named $ZZKRN.#ZZWAN. It is preconfigured by HP manufacturing
and started during the system load sequence.
You can alter the configuration of the WAN manager process by using the
NonStop Kernel subsystem SCF ALTER PROCESS command as described in the
SCF Reference Manual for the Kernel Subsystem.
Controlling the WAN Subsystem
•
Stopping WAN Subsystem Processes and Objects
•
Stopping the WAN Manager Process on page 5-8
•
Starting WAN Subsystem Processes and Objects on page 5-8
•
Starting the WAN Manager Process on page 5-9
•
Changing the Processor of the WAN Manager Process on page 5-9
Stopping WAN Subsystem Processes and Objects
Table 5-5. WAN Subsystem SCF Commands for Stopping Processes and
Objects (page 1 of 2)
Command Object Description
ABORT ADAPTER Terminates the operation of all three CLIPs on a SWAN
concentrator.
PATH Terminates the operation of a path to a CLIP.
PROCESS Terminates the operation of a ConMgr, an SNMP trap
multiplexer, a TFTP server, or a WANBoot process.
Terminating an autoconfigured process succeeds and requires
you to start the process to be active.
SERVER Terminates the operation of all three (or six) CLIPs on a SWAN
concentrator.
TASK Terminates the operation of a specified DLC task.
STOP ADAPTER Prevents the use of all three (or six) CLIPs on a SWAN
concentrator.
DEVICE Stops a data-communications subsystem object.
PATH Terminates the use of a path to a CLIP.