WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-13
ADD Command
Considerations
•
Activity over the WAN line running in the port associated with the TASK will be
terminated.
•
You must issue a START TASK command before you can use the task.
•
The ConMgr process must be running to be able to abort tasks.
ADD Command
ADD is a sensitive command that is used to define a WAN subsystem object to the
configuration database.
ADD ADAPTER Command
Use the ADD ADAPTER command to define a SWAN concentrator to the configuration
database.
The ADD ADAPTER command has the syntax:
conc-name
indicates the name of the SWAN concentrator. The SWAN concentrator name
should follow the naming convention described in HP Manufacturing Naming
Conventions (G06.26 and Earlier RVUs) on page 1-3 or HP Manufacturing Naming
Conventions (G06.27 and Later RVUs and H06.03 and Later RVUs) on page 1-7.
Wild card: You can use the asterisk (*) to specify all configured SERVER
objects.
ADD ADAPTER $ZZWAN.#conc-name
[ , ALTGATEWAYIP alt-router-ip-address ]
[ , ALTHOSTIP alt-ip-address ]
[ , ALTSUBNETMASK alt-subnet-mask ]
[ , ALTTCPIP alt-tcpip-name ]
, HOSTIP ip-address
[ , GATEWAYIP router-ip-address ]
[ , KERNELCODE swan-kernel-micode-file-name ]
[ , SNMPCODE swan-snmp-micode-file-name ]
[ , SUBNETMASK subnet-mask ]
, TCP/IP tcpip-name
, TRACKID "configuration-track-id"
[ , TYPE type-name ]