WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-14
ADD ADAPTER Command
ALTGATEWAYIP alt-router-ip-address
indicates the alternate SWAN-side router IP address for Path B. A gateway IP
address of 0 (0.0.0.0) indicates the SWAN concentrator is on the same network as
the host.
ALTHOSTIP alt-ip-address
indicates the IP address assigned to a SUBNET on the alternate TCP/IP process
(specified in the ALTTCPIP attribute).
To determine the IP address of a SUBNET, use the INFO SUBNET command as
shown in Example 6-1. The IP address is shown in boldface type.
ALTSUBNETMASK alt-subnet-mask
indicates the subnet mask of the SUBNET on the alternate TCP/IP process
(specified in the ALTTCPIP attribute). To address subnets within a LAN, the local
Value: The SWAN concentrator name is a string of alphanumeric
characters. The string is limited to the # sign followed by
eight characters. The first character must be an alphabetic
character. The name of each SWAN concentrator must be
unique within the Integrity NonStop NS-series or
NonStop S-series server.
Default: None provided.
Value: An IP address is a 4-octet (32-bit) numeric value. It is specified in
dotted decimal notation, which represents 4 octets in ASCII,
separated by periods; for example, 133.50.85.43. Each octet value is
a number in the range 0 through 255.
Default: 0 (0.0.0.0.)
Value: An IP address is a 4-octet (32-bit) numeric value. It is specified in
dotted decimal notation, which represents 4 octets in ASCII,
separated by periods; for example, 133.50.85.43. Each octet value is
a number in the range 0 through 255.
Default: None provided.
Example 6-1. Finding the IP Address of a Subnet
3-> info subnet $zb01d.*
TCP/IP Info SUBNET \MYSYS.$ZB01D.*
Name Devicename *IPADDRESS TYPE *SUBNETMASK SuName QIO *R
#LOOP0 \NOSYS.$NOIOP 127.0.0.1 LOOP-BACK %HFF000000 OFF N
#SN1 \MYSYS.L01D 172.16.40.26 ETHERNET %HFFFFFF00 ON N