WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-32
ALTER ADAPTER Command
TCP/IP tcpip-name
indicates the name of the preferred TCP/IP process that supports the SWAN
concentrator.
TRACKID "configuration-track-id"
uniquely identifies the SWAN concentrator. The configuration track-ID is assigned
when the SWAN concentrator is manufactured. It is stored in the SWAN
concentrator FRU Information Record (FIR) and is located on the rear panel of the
SWAN concentrator (For more information, see SWAN Concentrator Label,
Configuration Track-ID on page 4-10 and SWAN 2 Concentrator Label,
Configuration Track-ID on page 4-10).
TYPE type-name
indicates the type of concentrator being configured.
Considerations
•
You must issue a STOP ADAPTER command before you can alter an ADAPTER
object.
•
You must issue a START ADAPTER command before you can use the SWAN
concentrator.
•
The ALTER ADAPTER attribute changes do not take effect until START SERVER
commands are executed on all CLIPs of the adapter. Before issuing a START
SERVER command, you must place the SERVER object in a STOPPED state.
•
If the SERVER object is not in a STARTED state there is no activity on the SWAN
concentrator. The SERVER object must be placed in a STARTED state before the
SWAN concentrator can obtain its IP address.
•
During the configuration of WAN objects, the WAN manager process is provided
with files. The files are specified for the KERNELCODE attribute, SNMPCODE
attribute, IOPOBJECT attribute, and PROFILE object.
Value: The name of the TCP/IP process as configured in the TCP/IP sub-
system SCF ADD PROCESS command.
Default: None provided.
Value: Is the six-character ASCII configuration track-ID found on the SWAN
concentrator label.
Default: None provided.
Value: If a SWAN 2 concentrator is being configured, the value is SWAN 2. If
SS7 DLCs are being configured, the value is FWCTL. For all other
types, the value is SYNC.
Default: The value is SYNC.