WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-34
ALTER DEVICE Command
ALTER DEVICE Command
Use the ALTER DEVICE command to change the values of a data-communications
subsystem object. The ALTER DEVICE command changes only the specified
attributes of the target object.
The ALTER DEVICE command has this syntax (you must specify one or more
attributes):
device-name
indicates the name of the DEVICE object in the configuration database and is also
the name of the corresponding data-communications subsystem object.
ADAPTER conc-name
indicates the SWAN concentrator to be used by the DEVICE.
CLIP clip-num
indicates which CLIP the DEVICE object will use.
ALTER DEVICE $ZZWAN.#device-name
[ , ADAPTER conc-name ]
[ , CLIP clip-num ]
[ , HIGHPIN "ON" | "OFF" ]
[ , IOPOBJECT object-file-name ]
[ , LINE line-num ]
[ , modifier-keyword [ modifier-value ] ]...
[ , PATH path-name ]
[ , [ RECSIZE | RSIZE ] max-rex-size ]
[ , RESET
[ ( modifier-keyword [ modifier-keyword ... ] ) ] ]
[ , TYPE ( type , sub-type ) ]
Value: The name of the SWAN concentrator as specified in the ADD
DEVICE command.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured DEVICE
objects.
Value: The name of the SWAN concentrator object as specified in the ADD
ADAPTER command.
Default: None provided.
Value: The possible values for the CLIP number are 1, 2, or 3 for a SWAN
concentrator and 1, 2, 3, 4, 5, or 6 for a SWAN 2 concentrator.
Default: None provided.