WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-39
ALTER PROCESS Command
process-name
indicates the name of the SNMP trap multiplexer process. The SNMP trap
multiplexer process name should follow the naming convention described in HP
Manufacturing Naming Conventions (G06.26 and Earlier RVUs) on page 1-3 or HP
Manufacturing Naming Conventions (G06.27 and Later RVUs and H06.03 and
Later RVUs) on page 1-7.
ALTCPU alt-cpu-num
indicates the processor in which you want the backup process to run when it is
started by the WAN manager process.
CPU cpu-num
indicates the processor in which you want the primary process to run when it is
started by the WAN manager process.
IOPOBJECT object-file-name
indicates the file name of the executable object code for the SNMP trap multiplexer
process.
HOSTIP ip-address
indicates the IP address assigned to a SUBNET on the preferred TCP/IP process
(specified in the TCP/IP attribute).
Value: The process name is a string of alphanumeric characters. The
string is limited to the number sign (#)followed by five
characters. The first character must be an alphabetic
character.
The name of each process must be unique within the
Integrity NonStop NS-series or NonStop S-series server.
Default: None provided.
Value: The possible values are 0 through n.
Default: None provided.
Value: The possible values are 0 through n.
Default: None provided.
Value: The object file resides (by default) at $SYSTEM.SYSnn.SNMPTMUX.
Default: None provided.
Value: An IP address is a 4-octet (32-bit) numeric value. It is specified in
dotted decimal notation, which represents 4 octets in ASCII,
separated by periods: for example, 133.50.85.43. Each octet value is
a number in the range 0 through 255.
Default: None provided.