WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-42
ALTER PROCESS Command
STARTUP "$SYSTEM.CSSnn"
specifies the location of the download files access by the TFTP server process.
The default is $SYSTEM.CSSnn. The download files accessed by the TFTP server
process must be secured with “N” read access.
TCP/IP $tcpip-name
indicates the name of a TCP/IP process that supports the SWAN concentrator. You
must not specify a TCP/IP process used by another TFTP server process.
TYPE type , sub-type
indicates the NonStop Kernel registered type and subtype for the PROCESS
object. The type and subtype for a TFTP server process are 0,48.
Considerations
•
You cannot alter the HOSTIP or TCP/IP attributes. If you try to alter them, an error
message occurs (for example, “No Adapter configured” or “Another process with
the same HOSTIP already configured”).
WANBoot Process Syntax
The ALTER PROCESS command has this syntax for a WANBoot process:
process-name
indicates the name of the WANBoot process. The WANBoot process name should
follow the naming convention described in HP Manufacturing Naming Conventions
(G06.26 and Earlier RVUs) on page 1-3 or HP Manufacturing Naming Conventions
(G06.27 and Later RVUs and H06.03 and Later RVUs) on page 1-7.
Value: The name of the TCP/IP process as configured in the TCP/IP sub-
system SCF ADD PROCESS command.
Default: None provided.
ALTER PROCESS $ZZWAN.#process-name
[,ALTCPU alt-cpu-num ]
[,CPU cpu-num ]
[,HOSTIP ip-address ]
[,IOPOBJECT object-file-name ]
[,STARTUP "TCP/IP tcpip-name,[DUMPVOL $dumps]"
[,TYPE(type,sub-type) ]