WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-43
ALTER PROCESS Command
.
ALTCPU alt-cpu-num
indicates the processor in which you want the backup process to run when it is
started by the WAN manager process.
CPU cpu-num
indicates the processor in which you want the primary process to run when it is
started by the WAN manager process.
HOSTIP ip-address
indicates the IP address assigned to a SUBNET on the preferred TCP/IP process
(specified in the TCP/IP attribute).
To determine the IP address of a SUBNET, use the INFO SUBNET command as
shown in Example 6-1 on page 6-14.
IOPOBJECT object-file-name
indicates the file name of the executable object code for the WANBoot process.
Value: The process name is a string of alphanumeric characters. The
string is limited to the number sign (#) followed by five
characters. The first character must be an alphabetic
character.
The name of each process must be unique within the
Integrity NonStop NS-series or NonStop S-series server.
Default: None provided.
Value: The possible values are 0 through n.
Default: None provided.
Value: The possible values are 0 through n.
Default: None provided.
Value: An IP address is a 4-octet (32-bit) numeric value. It is specified in
dotted decimal notation, which represents 4 octets in ASCII,
separated by periods: for example, 133.50.85.43. Each octet value is
a number in the range 0 through 255.
Default: None provided.
Value: The object file resides (by default) at $SYSTEM.SYSnn.WANBOOT.
Default: None provided.