WAN Subsystem Configuration and Management Manual

SCF Commands

WAN Subsystem Configuration and Management Manual—522463-011

6-46

ALTER TASK Command

Use the ALTER TASK command to download task microcode to the CLIP FLASH

memory. When the task is started, it is copied to the CLIP RAM.

Each CLIP can be configured with one DLC0 task for WAN port 0 and one DLC1 task

for WAN port 1.

The ALTER TASK command has this syntax:

conc-name.clip-num.dlc-task

indicates the task.

PROGRAM download-file-name

identifies the location of the NonStop Kernel based 510 microcode DLC object file

code. The file must be secured with “N” read access.

ALTER TASK $ZZWAN.#conc-name.clip-num.dlc-task

, PROGRAM download-file-name

Value: The task name is the name of the task running on the SWAN concen-

trator.

conc-name is the name of the SWAN concentrator as specified in the

ADD ADAPTER command.

clip-num is the CLIP number. The possible values for the CLIP

number are 1, 2, or 3 for a SWAN concentrator and 1, 2, 3, 4, 5, or 6

for a SWAN 2 concentrator.

dlc-task is the task running in a WAN port. The possible values are

DLC0 or DLC1. DLC0 indicates the task running in WAN port 0. DLC1

indicates the task running in WAN port 1.

Default: None provided.

Value: The SWAN concentrator (T3880) DLC files are described in

Table 6-5. The SWAN 2 concentrator (T3881) DLC files are described

in Table 6-6.

Default: None provided.