WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-50
Considerations
conc-name
indicates the name of the SWAN concentrator.
SUB { ALL | NONE | ONLY }
selects the subordinate objects the command affects.
ALL
specifies that the named object and the subordinate objects are affected.
NONE
specifies that the named object is affected but that the subordinate objects are
not. NONE is the default.
ONLY
specifies that only the subordinate objects are affected.
Considerations
•
You must stop the ADAPTER object with the STOP ADAPTER command before
you can delete it. Use the STATUS ADAPTER with the SUB ALL option to
determine if there are any subordinate objects configured (such as SERVER,
PATH, or TASK). If there are, stop and delete each subordinate object.
•
Only ADAPTER objects that were added through the WAN subsystem ADD
command can be deleted.
DELETE DEVICE Command
Use the DELETE DEVICE command to remove the definition of a data
communications subsystem object from the configuration database.
The DELETE DEVICE command has this syntax:
Value: The name of the SWAN concentrator as specified in the ADD
ADAPTER command.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured
ADAPTER objects.
DELETE DEVICE $ZZWAN.#device-name