WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-53
DELETE PROFILE Command
process-name
indicates the name of the SNMP trap multiplexer, TFTP server, or WANBoot
process.
Considerations
•
You must stop the process with the STOP PROCESS command before you can
alter it.
•
Only PROCESS objects that were added with the WAN subsystem ADD command
can be deleted.
•
Objects that were automatically configured by WanMgr can also be deleted.
WanMgr automatically deletes the autoconfigured WAN processes if they are not in
use (no adapters configured for that subnet), so you do not need to delete the
processes autoconfigured by WanMgr.
DELETE PROFILE Command
Use the DELETE PROFILE command to remove a profile from the configuration
database.
The DELETE PROFILE command has this syntax:
profile-name
indicates the name of the profile.
Value: The name of the process as specified in the ADD PROCESS
command.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured SNMP
trap multiplexer, TFTP server, and WANBoot processes.
DELETE PROFILE $ZZWAN.#profile-name
Value: The name of the profile as specified in the ADD PROFILE
command.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured PROFILE
objects.