WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-55
INFO Command
ONLY
specifies that only the subordinate objects are affected.
Considerations
•
You must stop any devices, paths, or tasks configured for the SERVER before you
can delete the SERVER object.
•
Issue the STOP SERVER command to stop the CLIP before you delete the
SERVER object.
•
Only SERVER objects that were added with the WAN subsystem ADD command
can be deleted.
INFO Command
INFO is a nonsensitive command that is used to display static configuration information
for a WAN subsystem object.
INFO ADAPTER Command
Use the INFO ADAPTER command to return the static configuration attribute values
for a SWAN concentrator. You can also use the OSM Service Connection or the TSM
Service Application (G-series RVUs only). For more information about using OSM or
TSM, see the online help within each application.
The INFO ADAPTER command has this syntax:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
INFO [ , OUT file-spec ] ADAPTER $ZZWAN.#conc-name
[ , ALTTCPIP ]
[ , TCP/IP ]
[ , TRACKID ]
[ , TYPE ]
[ , SUBALL ]
[ , OBEYFORM ]