WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-56
INFO ADAPTER Command
conc-name
indicates the name of the SWAN concentrator.
ALTTCPIP
specify this attribute to display only the alternate TCP/IP process that supports the
SWAN concentrator.
TCP/IP
specify this attribute to display only the preferred TCP/IP process that supports the
SWAN concentrator.
TRACKID
specify this attribute to display only the configuration track-ID.
TYPE
specify this attribute to display only the SWAN concentrator type.
SUB ALL
indicates that the subordinate objects will be displayed.
OBEYFORM
causes the INFO command to display the information about the adapter in the form
of ADD ADAPTER commands, so you can use the information to create the
adapter’s configuration.
The format of the display for the INFO ADAPTER command is as follows:
Value: The name of the SWAN concentrator as specified in the ADD
ADAPTER command.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured
ADAPTER objects.
36-> info adapter $zzwan.#s01
WAN MANAGER Detailed Info Adapter \TAHITI.$ZZWAN.#S01
*TrackId.......... ZWXFF *TCP/IP Name....... $ZB019
*ALTTCPIP Name.... $ZB01D Concentrator Type. SYNC
KERNELCODE........ $SYSTEM.CSS00.C7953P00
*SNMPCODE......... $SYSTEM.CSS00.C7849P00
*HOSTIP Address... 172.016.035.016
ALTHOSTIP Address 172.016.045.016
GATEWAYIP Addr.... 000.000.000.000
ALTGATEWAYIP Addr. 000.000.000.000
SUBNETMASK........ %HFFFFFF00
ALTSUBNETMASK..... %HFFFFFF00