WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-57
INFO ADAPTER Command
TrackId
is the configuration track-ID configured for this SWAN concentrator.
TCP/IP Name
is the preferred TCP/IP process that supports this SWAN concentrator.
ALTTCPIP Name
is the alternate TCP/IP process that supports this SWAN concentrator.
Concentrator Type
is the type of concentrator. The types supported are SYNC, SWAN2, and FWCTL.
KERNELCODE
is the name of the microcode file configured to run in the essential part of the
FLASH memory.
SNMPCODE
is the name of the object file of the SNMP subagent that is configured to run in the
CLIP.
This attribute is made optional for both the SWAN and SWAN 2 concentrators
because the SNMP module is linked with the SWAN NonStop Kernel (in G06.07
and later RVUs) and does not need to be downloaded.
HOSTIP Address
is the IP address assigned to a SUBNET on the preferred TCP/IP process (shown
in the TCP/IP Name field).
ALTHOSTIP Address
is the IP address assigned to a SUBNET on the alternate TCP/IP process (shown
in the ALTTCPIP Name field).
GATEWAYIP Addr
is the SWAN-side router IP address for Path A. A gateway IP address of 0 (0.0.0.0)
indicates that the SWAN concentrator is on the same network as the host.
ALTGATEWAYIP Addr
indicates the alternate SWAN-side router IP address for Path B. A gateway IP
address of 0 (0.0.0.0) indicates that the SWAN concentrator is on the same
network as the host.
Note. If a SWAN 2 concentrator is being configured, the value is SWAN 2. If SS7 DLCs
are being configured, the value is FWCTL. For all other types, the value is SYNC.