WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-60
INFO DEVICE Command
LINE
specify this attribute to display only the SWAN concentrator LINE.
PATH
specify this attribute to display only the SWAN concentrator PATH.
PROFILE
specify this attribute to display only the PROFILE object.
RECSIZE
specify this attribute to display only the RECSIZE attribute.
TYPE
for the INFO DEVICE command, specify this attribute to display only the type and
subtype for the DEVICE.
OBEYFORM
causes the INFO command to display the information about the device in the form
of ADD DEVICE commands.
The format of the display for the INFO DEVICE command is as follows:
Adapter Name
is the SWAN concentrator name.
Clip
is the CLIP the DEVICE is configured to use.
Line
is the LINE the DEVICE is configured to use.
Path
is the PATH the DEVICE is configured to use.
38-> info device $zzwan.#A10
WAN MANAGER Detailed Info Device \MYSYS.$ZZWAN.#A10
*Adapter Name..... S01 *Clip ............ 1
*Line ............ 0 *Path ............ A
Profile........... MLHSWAN *RecSize.......... 12
Preferred Cpu..... 2 Alternate Cpu..... 3
*Type............. (63,06)
*MULTINAME........ $PMAU1
*IOPOBJECT........ $SYSTEM.SYS00.LHOBJ