WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-63
INFO PATH Command
conc-name.clip-num.path-name
indicates the path name.
IPADDRESS
specify this attribute to display only the IP address with which the path is
configured.
OBEYFORM
causes the INFO command to display the information about the path in the form of
ADD PATH commands.
Value: The path name is the name of the SWAN concentrator, followed by
the CLIP number, followed by the path name.
conc-name is the name of the SWAN concentrator as specified in
the ADD ADAPTER command.
clip-num is the CLIP number. The possible values for the CLIP
number are 1, 2, or 3 for a SWAN concentrator and 1, 2, 3, 4, 5, or
6 for a SWAN 2 concentrator.
path-name is the name of the Ethernet path. The possible values
for the path name are A or B. A indicates the A Ethernet path. B
indicates the B Ethernet path.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured PATH objects.