WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-66
INFO PROCESS Command
IOPOBJECT
specify this attribute to display only the process IOPOBJECT attribute.
OBEYFORM
causes the INFO command to display the information about the process in the
form of ADD PROCESS commands.
process-name
indicates the name of the SNMP trap multiplexer, TFTP server, or WANBoot
process.
The format of the display for the INFO PROCESS command (the display includes only
one sample of each type of PROCESS object) is:
Value: The name of the process as specified in the ADD PROCESS
command.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured SNMP
trap multiplexer, TFTP server, and WANBoot processes.
26-> INFO PROCESS $ZZWAN.#*
WAN MANAGER Detailed Info Process \MYSYS.$ZZWAN.#0
RecSize........... 0 *Type............. (50,00)
Preferred Cpu..... 0 Alternate Cpu..... 1
HOSTIP Address.... 192.168.010.002
*IOPOBJECT........ $SYSTEM.SYS01.CONMGR
WAN MANAGER Detailed Info Process \MYSYS.$ZZWAN.#ZTMX6
RecSize........... 0 *Type............. ( 0,49)
Preferred Cpu..... 0 Alternate Cpu..... 1
HOSTIP Address.... 192.168.010.003
*IOPOBJECT........ $SYSTEM.SYS01.SNMPTMUX
TCP/IP Name........ $ZB018
WAN MANAGER Detailed Info Process \IDC12.$ZZWAN.#ZWBAA
RecSize........... 0 *Type............. ( 0,30)
Preferred Cpu..... 0 Alternate Cpu..... 1
HOSTIP Address.... 192.168.010.004
*IOPOBJECT........ $SYSTEM.SYS00.WANBOOT
STARTUP String.... TCP/IP $ZTC1J
WAN MANAGER Detailed Info Process \IDC12.$ZZWAN.#ZTFAA
RecSize........... 0 *Type............. ( 0,48)
Preferred Cpu..... 2 Alternate Cpu..... 3
HOSTIP Address.... 192.168.010.004
*IOPOBJECT........ $SYSTEM.ZTCPIP.TFTPSRV
TCP/IP Name........ $ZTC1J
STARTUP String.... $SYSTEM.CSS02