WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-69
INFO PROFILE Command
defined in profile-name, and modifier-value specifies a string of characters
associated with the specified modifier-keyword.
OBEYFORM
causes the INFO command to display the information about the profile in the form
of ADD PROFILE commands.
The format of the display for the INFO PROFILE command is as follows:
Devices using this profile:
lists all the DEVICE objects that were configured through the ADD or ALTER
DEVICE command to use this profile.
DEVICE SPECIFIC MODIFIERS:
lists the modifier(s) contained in the profile, as specified in the command syntax.
Value: See the manuals listed in Table 6-4 on page 6-21 for a description of
the modifier keyword and modifier values that apply to each data
communications subsystem.
Default: None provided.
8-> info profile $zzwan.#slhip
WAN MANAGER Info profile \MYSYS.$ZZWAN.#SLHIP
No devices or processes are using this profile.
DEVICE SPECIFIC MODIFIERS:
NEXTSYS 255
L4CONGCTRL_ON
L4RETRIES 3
L4TIMEOUT 2000
COMPRESS_ON
PASSTHRU_ON
L4EXTPACKETS_ON
L4SENDWINDOW 254
PATHBLOCKBYTES 0
PATHPACKETBYTES 1024
RXWINDOW 7
TXWINDOW 7
OSSPACE 32767
OSTIMEOUT 300
MAXRECONNECTS 0
CONNECTTYPE_ACTIVEANDPASSIVE
AFTERMAXRETRIES_PASSIVE
ASSOCIATEDEV $ZTC0
SRCIPPORT 0
DESTIPPORT 1024
SRCIPADDR 0.0.0.0
DESTIPADDR 0.0.0.0
FRAMESIZE 132
L2RETRIES 20
SPEED 0