WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-70
INFO PROFILE Command
An example of the format of the display for the INFO PROFILE command (when you
only want to look at specified modifiers) is
The format of the display will vary, depending on which modifiers you specify.
Devices using this profile
lists all the DEVICE objects that were configured through the ADD or ALTER
DEVICE command to use this profile.
modifier-keyword1 through modifier-keywordn
lists only the specified modifier(s).
The format of the display will vary, depending on which modifiers you specify.
The format of the display for the INFO PROFILE command with the OBEYFORM option
is :
17-> info profile $zzwan.#pexfhdlc, program
WAN MANAGER Info profile \MYSYS.$ZZWAN.#PEXFHDLC
Devices using this profile
Device.......... 1 : $XFHP0
Device.......... 2 : $XFHS0
DEVICE SPECIFIC MODIFIERS:
PROGRAM C9312P00
17-> info profile $zzwan.*
ADD PROFILE \IDC15.$ZZWAN.#PEXPSIP ,&
FILE $SYSTEM.SYS00.PEXPSIP
ALTER PROFILE \IDC15.$ZZWAN.#PEXPSIP ,&
L4CONGCTRL_ON ,&
L4RETRIES 3,&
L4TIMEOUT 2000,&
COMPRESS_ON ,&
PASSTHRU_ON ,&
L4EXTPACKETS_ON ,&
SUPERPATH_OFF ,&
L4SENDWINDOW 254,&
PATHBLOCKBYTES 0,&
PATHPACKETBYTES 1024,&
RXWINDOW 7,&
TXWINDOW 7,&
OSSPACE 32767,&
OSTIMEOUT 300,&
MAXRECONNECTS 0,&
CONNECTTYPE_ACTIVEANDPASSIVE ,&
AFTERMAXRETRIES_PASSIVE ,&
ASSOCIATEDEV $ZTC0 ,&
SRCIPPORT 0,&
DESTIPPORT 1024