WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-71
INFO SERVER Command
Considerations
The INFO PROFILE display does not indicate which disk file name was specified in the
ADD PROFILE command. However, if you enter this command:
INFO PROFILE $ZZWAN.#*
the command response includes the name and contents of all PROFILE objects. If you
only want to see a list of the names of all PROFILE objects, use this command instead:
NAMES PROFILE $ZZWAN.#*
INFO SERVER Command
Use the INFO SERVER command to return static-configuration attribute values for a
CLIP.
The INFO SERVER command has this syntax:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
conc-name.clip-num
indicates the CLIP.
OBEYFORM
causes the INFO command to display the information about the SERVER in the
form of ADD SERVER commands.
INFO [ , OUT file-spec ] SERVER $ZZWAN.#conc-name.clip-num [
, OBEYFORM ]
Value: The SERVER name is the name of the SWAN concentrator, fol-
lowed by the CLIP number.
conc-name is the name of the SWAN concentrator as specified in
the ADD ADAPTER command.
clip-num is the CLIP number. The possible values for the CLIP
number are 1, 2, or 3 for a SWAN concentrator and 1, 2, 3, 4, 5, or
6 for a SWAN 2 concentrator.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured SERVER
objects.