WAN Subsystem Configuration and Management Manual

SCF Commands

WAN Subsystem Configuration and Management Manual—522463-011

6-73

INFO SUBSYS Command

OBEYFORM

causes the INFO command to display information about the SUBSYS in the form

of ADD SUBSYS commands.

SUBNETLIST

causes the INFO command to display SUBNET information for each process.

The format of the display for the INFO SUBSYS command is as follows:

Config File

is the current system configuration database.

IOPOBJECT

is the object file used to create the WAN manager process.

The format of the INFO SUBSYS command to create an SCF obey file for the entire

WAN subsystem using the OBEYFORM option is :

Example 6-3 shows an SCF INFO SUBSYS command display with the subnetlist

option:

47-> info subsys $zzwan

WAN MANAGER Detailed Info Subsys \MYSYS.$ZZWAN

Config File....... $SYSTEM.SYSTEM.CONF

IOPOBJECT......... \MYSYS.$SYSTEM.SYS01.WANMGR

17-> info subsys $zzwan, sub all, obeyform

Example 6-3. Sample SCF INFO SUBSYS Command Display

3-> info subsys $zzwan, subnetlist

WAN MANAGER Detailed Info Subsys \IDC4.$ZZWAN

----------------+-----------+-----------+-----------+-----------+-----------+

----------------+-----------+-----------+-----------+-----------+-----------+

192.168.010.002 |$ZTC1 |$ZWBAF |$ZTFAF |$ZTXAF |11121 |

----------------+-----------+-----------+-----------+-----------+-----------+

192.168.011.002 |$ZTC2 |$ZWBAH |$ZTFAH |$ZTXAH |11121 |

----------------+-----------+-----------+-----------+-----------+-----------+

----------------+-----------+-----------+-----------+-----------+-----------+

----------------+-----------+-----------+-----------+-----------+-----------+