WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-76
NAMES DEVICE Command
The format of the display for the NAMES ADAPTER command is as follows:
ADAPTER
shows a list of the configured ADAPTER objects.
NAMES DEVICE Command
Use the NAMES DEVICE command to display a list of the names of all configured
data- communications subsystem objects.
The NAMES DEVICE command has this syntax:
device-name
indicates the name of the DEVICE object in the configuration database and is also
the name of the corresponding data-communications subsystem object.
The format of the display for the NAMES DEVICE command is as follows:
DEVICE
shows a list of the configured data-communications subsystem objects.
3-> names adapter $zzwan.#*
WANMgr Names ADAPTER $ZZWAN.#*
ADAPTER
$ZZWAN.#S01
$ZZWAN.#S02
NAMES DEVICE $ZZWAN.#device-name
Value: The name of the data-communications subsystem object as
specified in the ADD DEVICE command.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured DEVICE
objects.
27-> names device $zzwan.#*
WANMgr Names DEVICE $ZZWAN.#*
DEVICE
$ZZWAN.#ATPP1
$ZZWAN.#ATPP2
$ZZWAN.#IPCORE
$ZZWAN.#NCP
$ZZWAN.#XFSP0
$ZZWAN.#XFHP0
$ZZWAN.#XFHS0
$ZZWAN.#XFSS0
$ZZWAN.#CP6P1