WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-79
NAMES PROFILE Command
The format of the display for the NAMES PROCESS command is as follows:
PROCESS
shows a list of the configured ConMgr, SNMP trap multiplexer, TFTP server, and
WANBoot processes.
NAMES PROFILE Command
Use the NAMES PROFILE command to display a list of the configured profiles.
The NAMES PROFILE command has this syntax:
profile-name
indicates the name of the profile.
The format of the display for the NAMES PROFILE command is as follows:
29-> names process $zzwan.#*
WANMgr Names PROCESS $ZZWAN.#*
PROCESS
$ZZWAN.#0
$ZZWAN.#1
$ZZWAN.#ZTMX2
$ZZWAN.#ZF019
$ZZWAN.#ZF01D
$ZZWAN.#ZW019
$ZZWAN.#ZW01D
NAMES PROFILE $ZZWAN.#profile-name
Value: The name of a profile as specified in the ADD PROFILE com-
mand.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured PROFILE
objects.
7-> names profile $zzwan.#*
WANMgr Names PROFILE $ZZWAN.#*
PROFILE
$ZZWAN.#EXPMNAM
$ZZWAN.#EXPPATH
$ZZWAN.#EXPSNAM
$ZZWAN.#MLHSAT
$ZZWAN.#MLHSWAN
$ZZWAN.#PEXPNCP
$ZZWAN.#PEXPSIP
$ZZWAN.#SLHIP
$ZZWAN.#SLHSAT
$ZZWAN.#SLHSWAN