WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-93
STATUS Command
conc-name.clip-num.dlc-task
indicates the task.
Considerations
•
The SWAN concentrator must have been previously defined through the ADD
ADAPTER, ADD SERVER, and ADD PATH commands.
•
The ADAPTER object must have been previously started through the START
ADAPTER command. Start the SERVER object with the START SERVER
command. Start the PATH object by using the START PATH command.
•
The SWAN concentrator is available for use by the input/output processes (IOPs)
after the ADAPTER and subordinate objects are started.
STATUS Command
STATUS is a nonsensitive command that is used to display current status and
configuration information for a specified object.
STATUS ADAPTER Command
Use the STATUS ADAPTER command to display current status and configuration
information about a SWAN concentrator. You can also use the OSM Service
Connection or the TSM Service Application (G-series RVUs only). For more
information about using OSM or TSM, see the online help within each application.
The STATUS ADAPTER command has this syntax:
Value: The task name is the name of the task running on the SWAN
concentrator.
conc-name is the name of the SWAN concentrator as specified in
the ADD ADAPTER command.
clip-num is the CLIP number. The possible values for the CLIP
number are 1, 2, or 3 for a SWAN concentrator and 1, 2, 3, 4, 5, or
6 for a SWAN 2 concentrator.
dlc-task is the task running in a WAN port. The possible values
are DLC0 or DLC1. DLC0 indicates the task running in WAN port 0.
DLC1 indicates the task running in WAN port 1.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured SERVER
objects.
STATUS ADAPTER $ZZWAN.#conc-name
[ , SUB { ALL | NONE | ONLY } ] [, HWSTATUS ]