WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-96
STATUS ADAPTER Command
The format of the display for the STATUS ADAPTER command with the SUB ALL
option is as follows (only the detailed information for one CLIP is included in the
display):
3-> status adapter $zzwan.#s01, sub all
WAN Manager STATUS ADAPTER for ADAPTER \MYSYS1.$ZZWAN.#S01
State........... STARTED
Number of clips. 3
Clip 1 status : CONFIGURED
Clip 2 status : CONFIGURED
Clip 3 status : CONFIGURED
WAN Manager STATUS SERVER for CLIP \MYSYS1.$ZZWAN.#S01.1
State :......... STARTED
Path A..........: CONFIGURED
Path B..........: CONFIGURED
Number of lines. 2
Line............ 0 : FREE
Line............ 1 : FREE
WAN Manager STATUS PATH for PATH \MYSYS1.$ZZWAN.#S01.1.A
State :......... STARTED
MEDIA TYPE...... ETHERNET
MEDIA ADDRESS... %H08008E004814
WAN Manager STATUS PATH for PATH \MYSYS1.$ZZWAN.#S01.1.B
State :......... STARTED
MEDIA TYPE...... ETHERNET
MEDIA ADDRESS... %H08008E004815
WAN Manager STATUS TASK for TASK \MYSYS1.$ZZWAN.#S01.1.DIAG
State :........... STOPPED
WAN Manager STATUS TASK for TASK \MYSYS1.$ZZWAN.#S01.1.DLC0
State :........... STARTED
CLIP Path Name.... A TCP/IP Port used... 5000
CLIP Protocol Id.. 1 Interface Type.... 0
Clip Program...... $SYSTEM.CSS01.C1096P00
Program timestamp..17 Jan 1997, 11:35:04.890
WAN Manager STATUS TASK for TASK \MYSYS1.$ZZWAN.#S01.1.DLC1
State :........... STARTED
CLIP Path Name.... A TCP/IP Port used... 5001
CLIP Protocol Id.. 1 Interface Type.... 0
Clip Program...... $SYSTEM.CSS01.C1098P00
Program timestamp..26 Mar 1997, 13:36:04.981