WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-98
STATUS DEVICE Command
Status of Fans
indicates the status of the FANs.
Status of Batteries
indicates the status of the batteries.
Status of Power Supply
indicates the status of the power supplies.
Status of LAN Paths
indicates the status of the LAN paths.
Status of POST
indicates the status of POST (power-on-self-test).
CLIP VPROC
indicates the VPROC of the CLIP.
STATUS DEVICE Command
Use the STATUS DEVICE command to display current status and configuration
information about a data-communications subsystem object.
The STATUS DEVICE command has this syntax:
device-name
indicates the name of the DEVICE object in the configuration database and is also
the name of the corresponding data-communications subsystem object.
The format of the display for the STATUS DEVICE command is as follows:
STATUS DEVICE $ZZWAN.#device-name
Value: The name of the data-communications subsystem object as
specified in the ADD DEVICE command.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured DEVICE
objects.
6-> status device $zzwan.#epx25
WAN Manager STATUS DEVICE for DEVICE \MYSYS1.$ZZWAN.#EPX25
State :......... STARTED
LDEV number..... 110
PPIN............ 2 ,13 BPIN............ 3 ,14