WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-99
STATUS PATH Command
State
indicates the state of the DEVICE object.
STARTED
indicates that the DEVICE process is running and an LDEV is allocated.
STOPPED
indicates that the DEVICE process is not running.
LDEV number
indicates the logical device number (LDEV) that was allocated to the DEVICE
when it was started by the WAN manager process.
STATUS PATH Command
Use the STATUS PATH command to display current status and configuration
information about a path on a CLIP. You can also use the OSM Service Connection or
the TSM Service Application (G-series RVUs only). For more information about using
OSM or TSM, see the online help within each application.
The STATUS PATH command has this syntax:
conc-name.clip-num.path-name
indicates the path name.
STATUS PATH $ZZWAN.#conc-name.clip-num.path-name
[ , MEDIAADDRESS ]
Value: The path name is the name of the SWAN concentrator, followed by
the CLIP number, followed by the path name.
conc-name is the name of the SWAN concentrator as specified in
the ADD ADAPTER command.
clip-num is the CLIP number. The possible values for the CLIP
number are 1, 2, or 3 for a SWAN concentrator and 1, 2, 3, 4, 5, or
6 for a SWAN 2 concentrator.
path-name is the name of an Ethernet path. The possible values
for the path name are A or B. A indicates the A Ethernet path. B
indicates the B Ethernet path.
Default: None provided.
Wild card: You can use the asterisk (*) to specify all configured PATH objects.