WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-102
STATUS SERVER Command
The format of the display for the STATUS PROCESS command (the display only
includes one sample of each type of PROCESS object) is as follows:
State
indicates the state of the process.
STARTED
indicates that the process is STARTED.
STOPPED
indicates that the process is STOPPED.
LDEV Number
indicates the logical device number (LDEV) that was allocated to the PROCESS
when it was started by the WAN manager process.
Process PIN
indicates the process ID (PID) of this process.
Process traced
indicates whether the process is being traced.
STATUS SERVER Command
Use the STATUS SERVER command to display current status and configuration
information about a CLIP. You can also use the OSM Service Connection or the TSM
Service Application (G-series RVUs only). For more information about using OSM or
TSM, see the online help within each application.
22-> status process $zzwan.#*
WAN Manager STATUS PROCESS for PROCESS \MYSYS1.$ZZWAN.#0
State :......... STARTED
LDEV Number..... 44
PPIN............ 0 ,265 Process traced.. NO
need snmp trap mux
WAN Manager STATUS PROCESS for PROCESS \MYSYS1.$ZZWAN.#ZBP01
State :......... STARTED
PPIN............ 0 ,290
WAN Manager STATUS PROCESS for PROCESS \MYSYS1.$ZZWAN.#ZTF01
State :......... STARTED
PPIN............ 0 ,17