WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-105
STATUS SERVER Command
The format of the display for the STATUS SERVER (CLIP) command with the
HWSTATUS option is as follows:
Status of Fans
indicates the status of the FANs.
Status of Batteries
indicates the status of the batteries.
Status of Power Supply
indicates the status of the power supplies.
Status of LAN Paths
indicates the status of the LAN paths.
Status of POST
indicates the status of POST (power-on-self-test).
CLIP VPROC
indicates the CLIP VPROC.
3-> status adapter $zzwan.#s01, hwstatus
Status of FAN A: OK/Fault Status of FAN B: OK/Fault
Status of Battery A: OK/Fault Status of Battery B: OK/Fault
Status of PS A: OK/Fault Status of PS B: OK/Fault
Status of LAN Path A : 10/100 Mbps, Full/Half Duplex or Fault or
PATH A IS DOWN / CABLE NOT CONNECTED
Status of LAN Path B : 10/100 Mbps, Full/Half Duplex or Fault or
PATH B IS DOWN / CABLE NOT CONNECTED
Status of POST: Successsful/Failed/Not Run
CLIP VPROC (obtained Onlne from CLIP): ,VPROC Info>