WAN Subsystem Configuration and Management Manual

SCF Commands

WAN Subsystem Configuration and Management Manual—522463-011

6-106

STATUS TASK Command

Use the STATUS TASK command to display current status and configuration

information about a DLC0 or DLC1 task. You can also use the OSM Service

Connection or the TSM Service Application (G-series RVUs only). For more

information about using OSM or TSM, see the online help within each application.

The STATUS TASK command gets the status of the DLC/DIAG tasks from the CLIP.

The STATUS TASK command has this syntax:

conc-name.clip-num.dlc-task

indicates the task.

IFTYPE

specify this attribute to display only the interface type.

PATH

specify this attribute to display only the SWAN concentrator path.

PROTID

specify this attribute to display only the protocol ID.

STATUS TASK $ZZWAN.#conc-name.clip-num.dlc-task

[ , IFTYPE ]

[ , PATH ]

[ , PROTID ]

[ , TCPPORT ]

Value: The task name is the name of the task running on the SWAN

concentrator.

conc-name is the name of the SWAN concentrator as specified

in the ADD ADAPTER command.

clip-num is the CLIP number. The possible values for the CLIP

number are 1, 2, or 3 for a SWAN concentrator and 1, 2, 3, 4, 5,

or 6 for a SWAN 2 concentrator.

dlc-task is the task running in a WAN port. The possible val-

ues are DLC0 or DLC1. DLC0 indicates the task running in WAN

port 0. DLC1 indicates the task running in WAN port 1.

Default: None provided.

Wild card: You can use the asterisk (*) to specify all configured SERVER

objects.