WAN Subsystem Configuration and Management Manual

SCF Commands
WAN Subsystem Configuration and Management Manual—522463-011
6-107
STATUS TASK Command
TCPPORT
specify this attribute to display only the port number.
The format of the display for the STATUS TASK command is as follows:
State
indicates the state of the TASK object.
STARTED
indicates that the TASK is STARTED and running in the CLIP.
STOPPED
indicates that the TASK is STOPPED.
CLIP Path Name
indicates the path used by the task for communicating with the input/output
process (IOP).
TCP/IP Port used
indicates the port numbers used by the task for communicating with the IOP.
CLIP Protocol Id
indicates the protocol ID.
Interface Type
indicates the interface type.
status task $zzwan.#s01.1.*
WAN Manager STATUS TASK for TASK \MYSYS1.$ZZWAN.#S01.1.DIAG
State :........... STOPPED
WAN Manager STATUS TASK for TASK \MYSYS1.$ZZWAN.#S01.1.DLC0
State :........... STARTED
CLIP Path Name.... A TCP/IP Port used... 5000
CLIP Protocol Id.. 1 Interface Type.... 0
Clip Program...... $SYSTEM.CSS01.C1098P00
Program timestamp..26 Mar 1997, 13:36:04.981
WAN Manager STATUS TASK for TASK \MYSYS1.$ZZWAN.#S01.1.DLC1
State :........... STARTED
CLIP Path Name.... A TCP/IP Port used... 5001
CLIP Protocol Id.. 1 Interface Type.... 0
Clip Program...... $SYSTEM.CSS01.C1098P00
Program timestamp..26 Mar 1997, 13:36:04.981