WAN Subsystem Configuration and Management Manual

SCF Commands

WAN Subsystem Configuration and Management Manual—522463-011

6-114

STOP TASK Command

Use the STOP TASK command to terminate a DLC task. The STOP TASK command

places the TASK object in the STOPPED state. You can also use the OSM Service

Connection or the TSM Service Application (G-series RVUs only). For more

information about using OSM or TSM, see the online help within each application.

The STOP TASK command has this syntax:

conc-name.clip-num.dlc-task

indicates the task.

Considerations

DEVICE objects that are already using the task are not affected, but subsequent

attempts to download tasks will fail.

STOP TASK $ZZWAN.#conc-name.clip-num.dlc-task

Value: The task name is the name of the task running on the SWAN

concentrator.

conc-name is the name of the SWAN concentrator as specified in

the ADD ADAPTER command.

clip-num is the CLIP number. The possible values for the CLIP

number are 1, 2, or 3 for a SWAN concentrator and 1, 2, 3, 4, 5, or

6 for a SWAN 2 concentrator.

dlc-task is the task running in a WAN port. The possible values

are DLC0 or DLC1. DLC0 indicates the task running in WAN port 0.

DLC1 indicates the task running in WAN port 1.

Default: None provided.

Wild card: You can use the asterisk (*) to specify all configured SERVER

objects.