WAN Subsystem Configuration and Management Manual

SCF Messages
WAN Subsystem Configuration and Management Manual—522463-011
A-12
WAN 00037
Cause. The process is added with a HOSTIP to which none of the adapters are
configured. This error can occur for the ADD or ALTER commands.
Effect. The command has no effect.
Recovery. Add an adapter with process' hostip or DELETE the process.
WAN 00038
Cause. The specified HOSTIP has already been configured with another process .
Only one process can be configured for the specified HostIp. This error can occur for
the ADD or ALTER commands. The cause of this error is reported in a WAN
subsystem EMS message that provides additional details.
Effect. The command has no effect.
Recovery. Add the process with a different HostIp or DELETE the process. You can
use the appropriate INFO command to determine which process is using the specified
HostIp. For example, this command can be used:
INFO SUBSYS $ZZWAN, SUBNETLIST
to see the HostIp-process combinations.
WAN 00039
Cause. The WAN manager process is unable to start the specified TMUX process due
to an internal error. This error might have occurred because of one of these:
Effect. The object (PROCESS) could not be started.
Recovery. Examine the corresponding EMS messages that indicate why the process
has failed and the cause of the failure. Follow the indicated EMS recovery text and
retry the command.
00037 No adapters are configured for the HOSTIP hostip
00038 The specified HOSTIP hostip is already configured with
another process proc-name
00039 The TMUX process TMUX-name is configured with no TCP/IP
or HOSTIP
Internal-error Explanation
0000001 NO TCP/IP AND HOSTIP CONFIGURED
0000002 NO HOSTIP CONFIGURED
0000003 NO TCP/IP CONFIGURED