WAN Subsystem Configuration and Management Manual

SCF Messages
WAN Subsystem Configuration and Management Manual—522463-011
A-13
WAN 00041
Cause. The WAN manager process is unable to start the specified process because
of an internal error. This error might have occurred due to one of these errors:
Effect. The command has no effect.
Recovery. Examine the corresponding EMS messages that indicate why the process
has failed and the cause of the failure. Follow the indicated EMS recovery text and
retry the command.
WAN 00042
Cause. The value of the specified attribute is not a valid string.
Effect. The command has no effect.
Recovery. Examine the command syntax HELP WAN command object-type,
correct the attribute value, and retry the command.
WAN 00044
Cause. WanMgr invalidated the adapter as the adapter's Pref/Alt HOSTIP
mismatches with Pref/Alt TCP/IP (HOSTIP has already been configured with another
TCP/IP).
Effect. The command has no effect.
Recovery. Delete the adapter and configure correctly. The Pref/Alt HOSTIP
should have the same corresponding Pref/Alt TCP/IP in all the adapter configurations.
This command can be used to verify the HOSTIP/TCP/IP combination:
INFO SUBSYS $ZZWAN, SUBNETLIST.
00041 Error while STARTing PROC-NAME
Internal-error Explanation
0000001 NO ADAPTER CONFIGURED FOR THE HOSTIP
0000002 NO HOSTIP CONFIGURED
0000003 ANOTHER PROCESS IS ALREADY CONFIGURED
FOR THE HOSTIP
00042 Invalid value for the startup string attribute:
startup-name
00044 Adapter adap-name TYPE is INVALID