WAN Subsystem Configuration and Management Manual

SCF Messages
WAN Subsystem Configuration and Management Manual—522463-011
A-14
WAN 00045
Cause. The specified adapter TYPE configured as SYNC/ASYNC/FWCTL was altered
to SWAN 3881 or vice versa. This error can occur for the ALTER command.
Effect. The command has no effect.
Recovery. No recovery is necessary.
WAN 00046
Cause. The specified KERNELCODE does not match with the adapter TYPE.
This error can occur for the ALTER command.
Effect. The command has no effect.
Recovery. Reissue the command with a matching KERNELCODE.
WAN 00047
Cause. The WAN manager process is unable to find any configured clips for the
specified adapter.
Effect. The command has no effect.
Recovery. Configure a clip on the specified adapter and repeat the command.
WAN 00048
Cause. The WAN manager process is unable to resolve the adapter TYPE . This is
due to the mismatch between the configured adapter TYPE and the real adapter
TYPE.
Effect. The command has no effect.
Recovery. Configure the adapter TYPE with the real adapter TYPE and retry the
command.
00045 Adapter(s) TYPE cannot be alterred from
SYNC/ASYNC/FWCTL to SWAN2 or vice versa
00046 KERNELCODE does not match with the Adapter(s) TYPE
00047 Server(s) are not configured for the specified adapter
00048 Configured Adapter TYPE mismatches with the real TYPE.