WAN Subsystem Configuration and Management Manual

Configuration Quick Start

WAN Subsystem Configuration and Management Manual—522463-011

1-3

HP Manufacturing Naming Conventions (G06.26 and

Earlier RVUs)

HP Manufacturing Naming Conventions

(G06.26 and Earlier RVUs)

HP manufacturing uses a naming convention for processes and devices that relates

logical names to the physical location of devices.

The WAN manager process automatically configures the WANBoot, TFTP server, and

the SNMP trap multiplexer processes.

is an alphabetic value (A-Z) assigned automatically by the WAN manager process.

is an alphanumeric value (A-Z or 0-9) assigned automatically by the WAN manager

process.

Note. The SNMP trap multiplexer does not require a corresponding SNMP agent process. The

WAN manager process does not configure SNMPTMUX with an SNMP agent process.

$ZWBmn, $ZTFmn, and $ZTXmn are reserved process names.

Table 1-1. Naming Conventions for WAN Subsystem, Related Processes, and

LAN Adapters (G06.26 and Earlier RVUs)

Process or Device Type Convention Example

WAN manager process Must be $ZZWAN $ZZWAN

TFTP server process $ZTFmn $ZTFAC

WANBoot process $ZWBmn $ZWBAC

NonStop TCP/IP process $ZBcabid-portid $ZB018

Logical interface (LIF) Lcabid-portid L018

SNMP agent process $ZTMXA, $ZTMXB, and so on $ZTMXA

SNMP trap multiplexer process $ZTXmn $ZTXAC

E4SA, FESA, or GESA Ecabid-slot E0153

G4SA

See G4SA Naming Conventions (G06.24, G06.25, and

G06.26 RVUs) on page 1-5

SWAN or SWAN 2 concentrator Sconcnum S01

Note. The WAN manager process does not impose any restrictions on adding a

PROCESS using the convention name, but use these names to add WAN processes to

distinguish between the generated process names and the user-supplied process names.