WAN Subsystem Configuration and Management Manual

Configuration Quick Start
WAN Subsystem Configuration and Management Manual—522463-011
1-4
HP Manufacturing Naming Conventions (G06.26 and
Earlier RVUs)
cabid
is the two-digit number that identifies the enclosure.
slot
is the adapter’s physical slot number in the enclosure:
portid
is the combination of the slot number and port number mapped in the following
way:
concnum
is the incremental number of the SWAN or SWAN 2 concentrator. For example, the
first concentrator would be 01, the second concentrator would be 02, and so on.
cabid Description Range of Values
0n The object is in processor enclosure n.01-08
n1 The object is in I/O enclosure 1
attached to processor enclosure n.
11, 21, 31, 41, 51, 61, 71, or
81
n2 The object is in I/O enclosure 2
attached to processor enclosure n.
12, 22, 32, 42, 52, 62, 72, or
82
n3 The object is in I/O enclosure 3
attached to processor enclosure n.
13, 23, 33, 43, 53, 63, 73, or
83
Number Description
51 to 54 An E4SA, FESA, or GESA
Slot
Number
Port
Number portid
Slot
Number
Port
Number portid
51 0 0 53 0 8
51 1 1 53 1 9
51 2 2 53 2 A
51 3 3 53 3 B
52 0 4 54 0 C
52 1 5 54 1 D
52 2 6 54 2 E
52 3 7 54 3 F