WAN Subsystem Configuration and Management Manual

Configuration Quick Start
WAN Subsystem Configuration and Management Manual—522463-011
1-9
Determining the Initial Configuration of a SWAN
Concentrator
Determining the Initial Configuration of a SWAN Concentrator
HP manufacturing configures all SWAN concentrators ordered with a NonStop server.
An example of a SWAN concentrator configuration is shown in the following illustration.
This illustration shows the following configuration for the SWAN concentrator named
$ZZWAN.#S01:
•
Ethernet port A is connected to PIF A on the G4SA named G11123. PIF A is
identified by logical interface (LIF) L11123A, which uses a SUBNET on the TCP/IP
process named $ZTC0 in processor 0.
•
Ethernet port B is connected to PIF A on the G4SA named G11124. PIF A is
identified by LIF L11124A. which uses a SUBNET on the TCP/IP process named
$ZTC1 in processor 1.
Note. A LIF is a logical abstraction of a physical port on a LAN adapter.
Processor 0 Processor 1
$ZZWANB
$ZZWAN.#1
$ZF1CM
$ZW1CM
$ZTC1
SAC
PIF PIF PIF
PIF
PIF PIF PIF
PIF
G4SA G11123
VST 917.VSD
G11123.0.A G11123.0.B G11123.0.C G11123.0.D G11124.0.A G11124.0.B G11124.0.C G11124.0.D
$ZZWANP
$ZZWAN.#0
$ZTMXA
$ZTXAC
$ZF1CI
$ZW1CI
$ZTC0
(Primary)
ConMgr Process
TFTP Server Process
WANBoot Process
TCP/IP Process
TFTP Server Process
WANBoot Process
TCP/IP Process
WAN Manager Process
ConMgr Process
SNMP Agent Process
SNMP Trap Mux Process
Ethernet Port A Ethernet Port B$ZZWAN.#S01
IPQ IPR IPS IPT IPU IPV
CLIP 1 CLIP 2 CLIP 3
01 01 01
Ethernet Multiplexer
WAN Ports
SAC
L11123A L11123B L11123C L11123D
L11124A L11124B L11124C
L11124D
WAN Manager Process
(Backup)
G4SA G11124