WAN Subsystem Configuration and Management Manual

Configuration Quick Start
WAN Subsystem Configuration and Management Manual—522463-011
1-11
Determining the Initial Configuration of a SWAN
Concentrator
Displaying SWAN Concentrator Configuration Information
Use the SCF INFO ADAPTER command, the OSM Service Connection, or the TSM
Service Application (G-series RVUs only) to display configuration information about
each configured SWAN concentrator on your system. For more information on using
OSM or TSM, see the online help within each application. The SCF command syntax is
as follows:
conc_name
is the name of a SWAN concentrator (ADAPTER object). To display the names of
all the configured SWAN concentrators on your system, use the SCF NAMES
ADAPTER command as shown in Example 1-1 on page 1-10.
Example 1-3 shows an SCF INFO ADAPTER command display for a SWAN
concentrator named $ZZWAN.#S01
:
INFO ADAPTER $ZZWAN.#conc-name
Example 1-3. Sample SCF INFO ADAPTER Command Display
info adapter $zzwan.#s01
WAN MANAGER Detailed Info Adapter \MYSYS.$ZZWAN.#S01
*TrackId.......... ZWXFF *TCP/IP Name....... $ZTC0
*ALTTCPIP Name.... $ZTC1 Concentrator Type. SYNC
KERNELCODE........ $SYSTEM.CSS00.C7953P00
*SNMPCODE......... $SYSTEM.CSS00.C7849P00
*HOSTIP Address... 172.16.35.16
ALTHOSTIP Address 172.16.45.16
GATEWAYIP Addr.... 000.000.000.000
ALTGATEWAYIP Addr. 000.000.000.000
SUBNETMASK........ %HFFFFFF00
ALTSUBNETMASK..... %HFFFFFF00