WAN Subsystem Configuration and Management Manual

Configuration Quick Start
WAN Subsystem Configuration and Management Manual—522463-011
1-13
Determining the Initial Configuration of a SWAN
Concentrator
GATEWAYIP Addr
is the gateway IP address assigned to the SWAN-side router IP address for Path
A. A gateway IP address of 0 (0.0.0.0) indicates that the SWAN concentrator is on
the same network as the host.
ALTGATEWAYIP Address
is the gateway IP address assigned to the alternate SWAN-side router IP address
for Path B. A gateway IP address of 0 (0.0.0.0) indicates that the SWAN
concentrator is on the same network as the host.
Displaying the Names of Configured WAN Subsystem
Processes
Use the SCF NAMES PROCESS command to display the names of all the configured
ConMgr, SNMP trap multiplexer, TFTP server, and WANBoot processes on your
system. The command syntax is:
Example 1-4 shows the following configured WAN subsystem processes:
•
Two ConMgr processes named $ZZWAN.#0 and $ZZWAN.#1
•
One SNMP trap multiplexer process named $ZZWAN.#ZTXAC
•
Two TFTP server processes named $ZZWAN.#ZT1AA and $ZZWAN.#ZT1BB
•
Two WANBoot processes named $ZZWAN.#ZW1AA and $ZZWAN.#ZW1BB
Displaying SNMP Trap Multiplexer Process Configuration
Information
Use the SCF INFO PROCESS command to display configuration information about
SNMP trap multiplexer processes on your system. The command syntax is:
NAMES PROCESS $ZZWAN.#*
Example 1-4. Sample SCF NAMES PROCESS Command Display
names process $zzwan.#*
WANMgr Names PROCESS $ZZWAN.#*
PROCESS
$ZZWAN.#0
$ZZWAN.#1
$ZZWAN.#ZTXAC
$ZZWAN.#ZT1AA
$ZZWAN.#ZT1BB
$ZZWAN.#ZW1AA
$ZZWAN.#ZW1BB
INFO PROCESS $ZZWAN.#snmp-trap-multiplexer